Installation of Application and Microscope

Follow these Steps:

• Carefully unpack the microscope from the box. Then place it on a table with an even base.

• Connect the USB cable of the microscope to your laptop.

• Open the camera in the laptop and select the camera option on the top left (In my laptop there is a camera rotation option after I have connected the microscope successfully.)

• Now, place a white sheet of paper under the microscope and adjust the focus of the microscope till you get a clear image of the white sheet of paper. (Sometimes there will be a problem with setting up the camera try replugging the microscope USB.)

• Carefully place the slide under the microscope and change the focus of the microscope till you get the clear zoomed image of the slide.