skip to content

Internet of Things

Lesson-1-> Introduction to IOT
1.1 What is IOT ?
1.2 Why do we need IOT?
1.3 How IOT works?
1.4 Features & Application of IOT
Lesson-2-> Introduction to Node MCU & Arduino IDE
2.1 What is Node MCU?
2.2 Hardware description of Node MCU
2.3 What is Arduino IDE?
2.4 How to download Arduino IDE software?
2.5 How to use Arduino IDE for Node MCU programming?
2.6 Introduction to different syntax for writing any code in Arduino IDE.
Lesson-3->Introduction to ThingSpeak
3.1 Introduction to Data Analytics.
3.2 Introduction to ThingSpeak
3.3 How to login in ThingSpeak
3.4 How it works ?
Activity-1-> IOT Enabled Light System
1.1 Introduction
1.2 What is server?
1.3 Circuit connection
1.4 Code to control Bulb by server
Activity-2-> IOT enabled Temperature Monitoring System
2.1 Introduction
2.2 How to setup Thingspeak?
2.3 Code
Activity-3-> IOT based Weather Reporting system
3.1 Introduction
3.2 Code
Activity-4-> IOT based Plant Monitoring system
4.1 Introduction to project
4.2 Coding
Activity-5 –> IoT Based Air Pollution Monitoring
5.1 Introduction to project
5.2 Code
Activity-6 –> IOT based Home Security System
6.1 Introduction to project
6.2 How to setup Telegram Bot?
6.3 Coding
Activity-7-> Home Automation using Google Assistant
7.1 What is Google Assistance?
7.2 Introduction to Activity
7.3 Installing Blynk App
7.4 How to Download Arduino IDE and Configuring Blynk Libraries?
7.5 How to upload code to NodeMCU?
7.6 Connect Google Assistant to NodeMCU using IFTTT
7.7 Coding to control Relay using Google Assistant
Activity-8 –> Home Automation using Alexa
8.1 Introduction to project
8.2 Code
Previous Lesson
Next Topic

1.1 Introduction

Aim of the Experiment :

To Turn Bulb ON/OFF Using Relay Module With NodeMCU Via Server Application.

In this project, we are using Node MCU module.The ESP series Wi-Fi modules become very popular among hobbyists and industries. It is a very small chip and can be embedded in small devices. 

For this project, we will be making our own web server to host web-pages and control LED (any appliances) remotely from anywhere in the world.

Minimum Requirements :

  • USB Cable

  • NodeMCU ESP8266

  • Relay Module

  • Bread Board

  • Jumper Wire (male to female)

  • Single Stand Wire

  • Bulb Holder And Plug

  • Bulb